Steel GMAW

Mig/Mag trådar

  • Sidergas S3

  • Sidergas S6

    • EN ISO 14341-A G 42 4 M21 3Si1/G 42 4 C1 3Si1 ; AWS A5.18 ER70S-6

      Copper coated solid wire for the GMAW of mild steels under both Ar/CO2 mixed gas and pure CO2 shielding gas. It is used in structural steel engineering.

  • Sidergas S7

    • EN ISO 14341-A G 46 5 M21 4Si1/G 46 4 C1 4Si1 ; AWS A5.18 ER70S-6

      Copper coated solid wire for the GMAW of mild steels, with higher Manganese and Silicon content to increase deoxidation and mechanical properties. To be used with both Ar/CO2 mixed gas and pure CO2 shielding gas.

  • Sidergas D2

    • EN ISO 14341-A G 50 4 M21 4Mo ; AWS A5.28 ER80S-D2

      Copper coated solid wire for the GMAW of creep-resistant low-alloyed steels and steels with a service temperature of up to 500 °C, with higher Manganese and Silicon content to increase deoxidation properties. Molybdenum (0,5%) provide high mechanical properties to the weld deposit at high temperature. The wire can also be used for welding low-alloyed, high tensile strength steels. To be used with both Ar/CO2 mixed gas and Ar/CO2/O2

  • SIDERGAS COR

    • EN ISO 14341-A G 46 4 M21 Z ; AWS A5.28 ER80S-G

      Copper coated solid wire for the GMAW of weathering resistant constructional steels. Cu and Ni contents in the welding wire leads to increased resistance to atmospheric corrosion in the weld deposit. It can be used also for the welding of high strength steels. To be used with both Ar/CO2 mixed gas and Ar/CO2/O2 shielding gas.

  • SIDERGAS T1

    • EN ISO 16834-A G 55 4 M21 Mn3NiCrMo ; AWS A5.28 ER80S-G

      Copper coated solid wire for the GMAW of high strength structural steels. Also suitable for welding steels whenever good impact strength at lower temperature is required. To be used with both Ar/CO2 mixed gas and Ar/CO2/O2 shielding gas.

  • SIDERGAS T1S

    • EN ISO 16834-A G 62 4 M21 Mn3NiCrMo ; AWS A5.28 ER100S-G

      Copper coated solid wire for the GMAW of high strength structural steels. Also suitable for welding steels whenever good impact strength at lower temperature is required. To be used with both Ar/CO2 mixed gas and Ar/CO2/O2 shielding gas.

  • SIDERGAS NIMOCR

    • EN ISO 16834-A G 69 4 M21 Mn3Ni1CrMo ; AWS A5.28 ER110S-G

      Copper coated solid wire for the GMAW of high strength structural steels. Also suitable for welding steels whenever good impact strength at lower temperature is required. To be used with both Ar/CO2 mixed gas and Ar/CO2/O2 shielding gas.

  • SIDERGAS NI1

    • EN ISO 14341-A G 46 6 M21 3Ni1 ; AWS A5.28 ER80S-Ni1

      Copper coated solid wire for the GMAW of 1%Ni low-alloyed steels and fine grain steels, when the weld metal toughness properties down to -60 °C are required in the as welded conditions. Nickel increases atmospheric weathering resistance. Typical off-shore applications. To be used with both Ar/CO2 mixed gas.

Steel Saw

UP TRÅDAR

  • SIDERGAS S2 SAW

  • SIDERGAS S2SI SAW

  • SIDERGAS S3SI SAW

  • SIDERGAS S2MO SAW

    • EN ISO 14171-A S2Mo ; AWS A5.23 EA2

      Copper coated solid wire for submerged arc welding (SAW) of fine grain and creep resistant steels. Service temperature up to 500°C. It is designed for use in combination with fluxes SID FL A AR, SID FL A AB, SID FL A AF.

  • SIDERGAS COR SAW

    • EN ISO 14171-A S2Ni1Cu ; AWS A5.23 EG

      Copper coated solid low-alloyed wire electrode for submerged arc welding (SAW) of weathering steels such as Resco®, Corten®, Patinax®, etc. used in the steel assembly exposed to environments (salt water, sulphurus gases and caustic liquors). It is designed for use in combination with flux SID FL A AB.

Steel gtaw

Tig trådar

  • SIDERGAS TS3

    • EN ISO 636-A W 42 5 W2Si ; AWS A5.18 ER70S-3

      Copper coated solid rod for the GTAW of mild steels. It is used in general construction, pressure vessel fabrication, pipeline constructions and shipbuilding. It is generally used for the root pass. To be used with gas EN ISO 14175-I1 (Ar 100%).

  • SIDERGAS TS6

    • EN ISO 636-A W 42 5 W3Si1 ; AWS A5.18 ER70S-6

      Copper coated solid rod for the GTAW of mild steels. It is used in general construction, pressure vessel fabrication, pipeline constructions and shipbuilding. It is generally used for the root pass. To be used with gas EN ISO 14175-I1 (Ar 100%).

  • SIDERGAS TS7

    • EN ISO 636-A W 46 5 W4Si1 ; AWS A5.18 ER70S-6

      Copper coated solid rod for the GTAW of mild steels, with higher Manganese and Silicon content, to increase deoxidation and mechanical properties. Superior weld bead appearance. It is used in general construction, pressure vessel fabrication, pipeline constructions and shipbuilding. To be used with gas EN ISO 14175-I1 (Ar 100%).

  • SIDERGAS TD2

    • EN ISO 636-B W 57A 5 W4M31 ; AWS A5.28 ER80S-D2

      Copper coated solid rod for the GTAW of creep-resistant low-alloyed steels and steels with a service temperature of up to 500 °C with higher Manganese and Silicon content, to increase deoxidation properties. Molybdenum (0,5%) provide high mechanical properties to the weld deposit at high temperature. The rod can also be used for welding low-alloyed, high tensile strength steels. To be used with gas EN ISO 14175-I1 (Ar 100%).

  • SIDERGAS TC1

    • EN ISO 21952-A W CrMo1Si ; AWS A5.28 ER80S-B2

      1,25%Cr/0,5%Mo copper coated solid rod for the GTAW of creep resisting steels of similar composition. Main application include boilers, plate and tube steels and also for the welding of quenched and tempered and case hardening steels. To be used with gas EN ISO 14175-I1 (Ar 100%).

  • SIDERGAS TC2

    • EN ISO 21952-A W CrMo2Si ; AWS A5.28 ER90S-B3

      Copper coated solid rod for the GTAW of 2,25%Cr/1,0%Mo creep resisting steels of similar composition and 0,5%Mo/0,25%V and 1%Cr/1%Mo. Main application include boilers, plate and tube steels as well as in oil refineries. Also suitable for welding of quenched and tempered and case hardening steels. To be used with gas EN ISO 14175-I1 (Ar 100%).

  • SIDERGAS TN1

    • EN ISO 636-A W 46 6 W3Ni1 ; AWS A5.28 ER80S-Ni1

      Copper coated solid rod for the GTAW of 1%Ni and fine grain steels, when the weld metal toughness properties down to -60 °C are required in the as welded conditions. It is designed for offshore pipework and similar high integrity applications. To be used with gas EN ISO 14175-I1 (Ar 100%).

  • SIDERGAS TNC

    • EN ISO 16834-A W 69 5 I1 Mn3Ni1CrMo ; AWS A5.28 ER110S-G

      Copper coated solid rod for the GTAW of high strength structural steels. Also suitable for welding steels whenever good impact strength at lower temperatures is required. To be used with gas EN ISO 14175-I1 (Ar 100%).

  • SIDERGAS TRE

    • EN ISO 636-A W 46 5 W0 ; AWS A5.28 ER80S-G

      Copper coated solid rod for the GTAW of weathering steels. The content of Cu and Ni allow to increase weld bead resistance to atmospheric corrosion. Due to the alloying system it can also be used for welding of high yield strength steels with a yield strength of up to 470 MPa. To be used with gas EN ISO 14175-I1 (Ar 100%).